FAQ


	Question Topics	Answer
	Prices	As the manufacturer of Envirotac II, we offer factory direct prices. Envirotac II is priced per gallon/liter.
	Discounts	Discounts are based on volume. Substantial discounts are available with full truckloads (4,400 gallons +)
	Payment Terms	COD or Net 30 on approved credit
	Payment Method	We accept cash, checks, Visa, Master Card, an all Government Procurement Cards
	Bids/Proposals	We can provide material supply, shipping, consultation and application for any size project. Contact us today for accurate project costs. Formal bids and proposals are available.
	Minimum Order	Envirotac II can be purchased in volumes as small as 55 gallon (208 L) drums.
	Envirotac I & II	Envirotac I is the premium high solids (51 - 55% version of Envirotac II (39-43%)
	Availability	30,000 gallons (113,000 L) of Envirotac II are available on an immediate basis.
	Cure Time	Envirotac II will cure within 2-24 hours depending on the temperature.
	Penetration Depth	Normal surface treatment penetrates 3/4" (2cm) deep. Application method, soil type and compaction are the determining factors.
	Cold Weather	Cold weather will increase cure times.
	Freezing	Freezing Envirotac II is not recommended. Polymers will coagulate and decrease the original strength.
	Shipping	Enviortac II can be shipped anywhere in the U.s. and to any shipping port Internationally.
	Dry Form	Envirotac II is a concentrated liquid and cannot be produced in dry form.
	Performance Factors	The following factors determine how long Envirotac II will perform: Amount of Envirotac II used (coverage rate) Depth of Penetration/Treatment Degree of Soil Compaction Type of Soil Volume & Weight of Vehicle Traffic
	Normal Life Span	Unpaved Roads: 12 - 24 months+ Dust Control: 12 - 16+ months We can custom design longer/shorter periods as needed.
	Follow-up Applications	Once performance has reached the limits of its longevity, a follow-up application is necessary to restore and rejuvenate its optimal performance. Reapplying Envirotac II to a previously treated area requires usually only 20% of the original application amount to achieve the same results.
	Soil Type	Envirotac II will perform with any soil type. Different soils require different application rates.
	Salt Water Dilution	Envirotac II is designed to be diluted with fresh water. Salt water dilution is not recommended. Salt water will chemically weaken the original strength.
	Rain/Precipitation	Envirotac II does not dissipate (wash away) with rain. Heavier concentrations, will actually waterproof the treated surface.
	Decreased Application Rates	Decreasing the application rate (increased coverage) will result in reduced strength, longevity and performance.
	Cleaning	Envirotac II is water-soluble. Application equipment should simply be rinsed out after use. Cured (hardened) Envirotac II is still water-soluble but requires some effort.
	Distributors	We do not offer exclusive distributorships. However, significant discounts are available for large volumes.
	Hydro-seeding	A hydroseeder is recommended to mix and apply seed, mulch and Envirotac II together.